- Settings for MTN Data Services/Internet Browsinghttp://phcv.me/17312bb6Any data device that you use needs to be configured to use MTN's extensive mobile data network. Your MTN-branded USB modem or data card has already been configured so you do not have to worry about that.
If you're not using an MTN-branded device, you can request for MTN's internet browsing settings (also referred to as APN settings or packet data settings on some phones) by typing the word SETTINGS as an SMS and send to 3888, free of charge.
If your handset or device allows over-the-air updates, you will receive an SMS notifying you to save setup information that the network will send to you. Please save the settings as soon as they are delivered to your phone to avoid deleting them in error.
Also, if you currently enjoy Internet browsing using your 3.5G enabled handset on MTN's data network, chances are that your handset is already configured to use MTN's data network. You may however send SETTINGS to 3888 to be double sure!
For handsets or other devices that need to be configured manually (e.g. most Windows-based handsets), you will need to configure the data settings on your handset with the settings information provided below:
http://phcv.me/17312bb6
Wednesday 23 September 2015
mobile transfer codes
HOW TO USE POTABLE PROXY
Without
further ado lets go straight and show you how to use Xt181 portable proxy as best simple
server alternative for PC browsing with MTN BB sub;
= =>
First of all you must have subscribed to any of the BB10 BBLITE daily, weekly
or monthly plan same way you did while using simple server
= => You
also need to configure your browser to use proxy server address as 127.0.0.1 and 8080 for the port in similar fashion with your simple server
= => You
need Xt181 portable proxy that will now replace your simple server, download it here
= => It
is a zip folder, so you need to extract the content of the folder after download
with any of your zip folder manager; you will find 3 files inside
= =>
Launch the executable file in it to kick-start the Xt181 portable proxy
= => Then
insert your modem with any of the MTN BB10 plan subscribed SIM and connect it
= => Finally
on your launched Xt181 portable proxy locate and click on Listen at the top left hand side to connect.
Tuesday 22 September 2015
GSM CODES
HOW TO KNOW ORIGINAL PHONE AND
A FAKE PHONE
Before
you buy a new phone dial *#06# ,it will display the serial number or IMEI
number which must be 15 digits and must begin with 35. Now check whether the
number displayed is the same with the number on the battery base. If it's
original the numbers would be the same, if fake the numbers would be different.
You can check your phone right now to know whether you are using original phone
or fake phone.
PRODUCT CODES FOR NOKIA,
MOTOROLA, BOSCH, PHILIPS, LG, SAGEM, TRIUM, NEC, ALCATEL, SIEMENS, SAMSUNG.
NOKIA
IMEI number *#06#
Software version *#0000#
SIM lock info *#92702689#
Enhanced full rate *3370#
Enhanced half rate *4720#
OFF #3370#
To know the manufactring date dial *#0000#
IMEI number *#06#
Software version *#0000#
SIM lock info *#92702689#
Enhanced full rate *3370#
Enhanced half rate *4720#
OFF #3370#
To know the manufactring date dial *#0000#
MORE ABOUT NOKIA
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
ALCATEL
IMEI number *#06#
Net monitor *#0000#
IMEI number *#06#
Net monitor *#0000#
BOSCH
IMEI number *#06#
Default language *#0000#
Net monitor *3262255*8378#
IMEI number *#06#
Default language *#0000#
Net monitor *3262255*8378#
MOTOROLA
IMEI number *#06#
Net monitor ON ***113*1*
Net monitor OFF ***113*2*
To know manufacturing date dial #02# . Dont send. Only available on C117,C115,C116,C118,C119,C126.
IMEI number *#06#
Net monitor ON ***113*1*
Net monitor OFF ***113*2*
To know manufacturing date dial #02# . Dont send. Only available on C117,C115,C116,C118,C119,C126.
PHILIPS
IMEI number *#06#
SIM lock info *#8377#
Security code *#1234# OR *#7489#
IMEI number *#06#
SIM lock info *#8377#
Security code *#1234# OR *#7489#
SAMSUNG
IMEI number *#06#
Software version *#9999# OR *#0837#
SIM lock info *0324#
Changing LCD contrast #0523#
Memory information *0377#
Reset memory (SIM lock revovery) *2767*3855#
Battery state *9998*228#
Alarm beeper *998*289#
Vibra test *#9987*842#
IMEI number *#06#
Software version *#9999# OR *#0837#
SIM lock info *0324#
Changing LCD contrast #0523#
Memory information *0377#
Reset memory (SIM lock revovery) *2767*3855#
Battery state *9998*228#
Alarm beeper *998*289#
Vibra test *#9987*842#
SIEMENS,
LG, SAGEM, TRIUM, NEC
IMEI number *06#
Software version #6276421#
IMEI number *06#
Software version #6276421#
HOW TO BLOCK SOMEBODY FROM
CALLING YOUR NUMBER.
Dial
*35*0000*THE PERSON'S NUMBER#SEND. From then on the person will not be able to
call you again
with that number. Dial *35*0000# to cancel it.
Remember if you have barred more than one person when you dial *35*0000# it will cancel everybody you barred.
with that number. Dial *35*0000# to cancel it.
Remember if you have barred more than one person when you dial *35*0000# it will cancel everybody you barred.
HOW TO MAKE SOMEBODY PAY IF
THEY FLASH YOU.
If
somebody is flashing you and you want to make him/her pay just dial
**21*171NUMBER OF THE FLASHER#SEND. From then on if the person flash you again
his/her money will be off. Please don't use this code to wicked somebody unless
you have told the person not to call you again. To cancel dial
##21#SEND. Remember for some phones ##21#SEND means to bar all incoming calls. Don't use these codes if you don't know what you are doing.
##21#SEND. Remember for some phones ##21#SEND means to bar all incoming calls. Don't use these codes if you don't know what you are doing.
HOW TO LOCK AND UNLOCK YOUR
CREDIT.
With
this code you will be the only person to make call from your phone. Nobody will
be able to make call from your phone even if you have credit.
To lock dial **03*330*0000*2213#SEND
To unlock dial **03*2213#SEND
To lock dial **03*330*0000*2213#SEND
To unlock dial **03*2213#SEND
HOW TO CHECK YOUR WAEC RESULT
WITH YOUR PHONE.
Go
to text message. Type WAEC*YOUR EXAM NUMBER*PIN NUMBER ON YOUR SCRATCH
CARD*YEAR OF EXAM*
send to 32327 . Wait and you will get your exam result.
send to 32327 . Wait and you will get your exam result.
HOW TO RETRIEVE YOUR STOLEN SIM
CARD.
First,
buy a new SIM card then call the customer care of your network. Give them the
following informations: THE MOST 3 NUMBERS YOU CALL, THE LAST DAY YOU RECHARGED
YOUR PHONE, THE DAY YOU LOST YOUR SIM. They know all these informations and
once you have answered correctly they will put your line back to your new SIM.
HOW TO ANSWER YOUR CALLS FROM
ANOTHER PERSON'S PHONE IF YOUR BATTERY IS LOW OR YOUR PHONE IS OFF.
Before
you totally run out of battery dial **21*PHONE NUMBER OF THE PERSON YOU WANT TO
RECEIVE YOUR CALLS FROM#SEND
From then if somebody call you it will ring on the person's phone you have put. Cancel it any time from your own SIM card by dialing ##21#SEND .Remember if you don't have battery on your phone at all you can also remove your SIM card and put it into another person's phone then put the code. In any case always dial ##21#SEND from your own SIM card to cancel it.
From then if somebody call you it will ring on the person's phone you have put. Cancel it any time from your own SIM card by dialing ##21#SEND .Remember if you don't have battery on your phone at all you can also remove your SIM card and put it into another person's phone then put the code. In any case always dial ##21#SEND from your own SIM card to cancel it.
IF YOU CANNOT RECEIVE OR MAKE
CALLS AND YOU WANT TO FIND OUT IF YOUR PHONE IS OK.
Dial
#330*0000#SEND to cancel all call barrings.
HOW TO STOP SOMEBODY FROM
MAKING INTERNATION CALL FROM YOUR PHONE.
Dial
**33*0000#SEND
To cancel dial #331#*0000#SEND
To cancel dial #331#*0000#SEND
HOW TO HIDE YOUR PHONE NUMBER
BEFORE MAKING A CALL.
Dial
#131#THE PERSON'S NUMBER then SEND.
HOW TO LISTEN TO ANOTNER
PERSON'S PHONE CONVERSATIONS.
For
example you can listen to the phone conversations of your wife, husband, girl
friend, boy friends; anybody's calls.
*****I AM NOT GIVING THE CODE******
*****I AM NOT GIVING THE CODE******
WARNING!!!.
This
code is very sensitive so I'am not giving it away. This code can break
marriages and cause serious troubles between friends. It is to your interest
not to know this code at all because if you know it you will certainly find
faults in somebody sooner or later. Remember nobody is a saint including
yourself. But if you insist you need it then contact me. You will pay N1,000
to have it and you must be over 35 years of age before I give it to you. All
you would need do is put the code on the phone and whenever the person receives
a call it will also ring on your phone whether you live in the same house or
whether you are in Abuja and the person is in Lagos you would be able to listen
to his/her phone conversations. Wait until the person pick up the call first
then you can start
listening to their conversations.
However, if you use this code for the right reasons it is actually very helpful. For example I use it to listen to my wife's phone conversations. But before doing that I informed my wife in advance about it and she is aware I' am monitoring her calls. For this she don't mishave. I also monitor my son's call who is in school and he is also aware I' am listening to his phone conversations. I told him before puting the codes. You must inform them before listening to their phone conversations.
Email address: ezestephen216@gmail.com or stokwudili@gmail.com
listening to their conversations.
However, if you use this code for the right reasons it is actually very helpful. For example I use it to listen to my wife's phone conversations. But before doing that I informed my wife in advance about it and she is aware I' am monitoring her calls. For this she don't mishave. I also monitor my son's call who is in school and he is also aware I' am listening to his phone conversations. I told him before puting the codes. You must inform them before listening to their phone conversations.
Email address: ezestephen216@gmail.com or stokwudili@gmail.com
CODES FOR MTN, ZAIN, GLO, ETISALAT, VISAFONE.
MTN
FREE NIGHT CALL FROM 12.30 am to 4.30 am.
Go to message. Type 710 then send to 131 .You will be enabled. Remember you must have at least
N100 on your phone before you enjoy this service.
Go to message. Type 710 then send to 131 .You will be enabled. Remember you must have at least
N100 on your phone before you enjoy this service.
MTN CALL ME BACK CODES.
This codes allows you to send free text message MTN to MTN whether you have credit on your phone
or not.
For call me back *133*1*THE PERSON'S PHONE NUMBER#SEND
For I miss you dial *133*2*THE PERSON'S PHONE NUMBER#SEND
For I love you dial *133*3*THE PERSON'S PHONE NUMBER#SEND
For it's an emergency dial *133*4*THE PERSON'S PHONE NUMBER#SEND
This codes allows you to send free text message MTN to MTN whether you have credit on your phone
or not.
For call me back *133*1*THE PERSON'S PHONE NUMBER#SEND
For I miss you dial *133*2*THE PERSON'S PHONE NUMBER#SEND
For I love you dial *133*3*THE PERSON'S PHONE NUMBER#SEND
For it's an emergency dial *133*4*THE PERSON'S PHONE NUMBER#SEND
MTN CALLER TUNE.
This enables your phone to play any music of your choice to anybody that calls you instead of the normal KRUUUUUM KRUUUUM ringing. Send REG to 4100 then you will receive a confirmation to select music code.
This enables your phone to play any music of your choice to anybody that calls you instead of the normal KRUUUUUM KRUUUUM ringing. Send REG to 4100 then you will receive a confirmation to select music code.
HOW TO REDUCE CALL COST ON MTN.
To register dial *560*1*YOUR FRIEND'S PHONE NUMBER#SEND
To confirm you have registered dial *560#SEND
To register dial *560*1*YOUR FRIEND'S PHONE NUMBER#SEND
To confirm you have registered dial *560#SEND
HOW TO SHARE CREDIT ON MTN.
*160*THE PERSON'S NUMBER*AMOUNT*PIN NUMBER then send.
*160*THE PERSON'S NUMBER*AMOUNT*PIN NUMBER then send.
HOW TO REGISTER YOUR PIN NUMBER
ON MTN.
Go to message. Text 0000 space enter your pin example 3333 space 3333 then send to 777. You will
get a confirmation.
Go to message. Text 0000 space enter your pin example 3333 space 3333 then send to 777. You will
get a confirmation.
VISAFONE.
To
activate dial *888*SEND
To recharge dial *889*RECHARGE NUMBER#SEND
To check account balance dial *775#SEND OR dial *888*SEND listen to the voice prompt.
Customer service 333
Call me back *446*THE PERSON'S NUMBER#SEND
To get local news dial *444*203#SEND .Sevice costs N20 per SMS
To listen to news dial *444*201#SEND
Change to VISAFONE business line, dial *444*115#SEND . You will then start calling VISAFONE
to VISAFONE at N3.00 per munite and VISAFONE to other networks at N5.00 a munite.
Migration cost is N50.
To recharge dial *889*RECHARGE NUMBER#SEND
To check account balance dial *775#SEND OR dial *888*SEND listen to the voice prompt.
Customer service 333
Call me back *446*THE PERSON'S NUMBER#SEND
To get local news dial *444*203#SEND .Sevice costs N20 per SMS
To listen to news dial *444*201#SEND
Change to VISAFONE business line, dial *444*115#SEND . You will then start calling VISAFONE
to VISAFONE at N3.00 per munite and VISAFONE to other networks at N5.00 a munite.
Migration cost is N50.
HOW TO KNOW YOUR FLIGHT
SCHEDULE ON VISAFONE
Dial *444*202#SEND .Sevice costs N20
Dial *444*202#SEND .Sevice costs N20
HOW
TO BORROW CREDIT FROM VISAFONE
Dial *888*YOUR PHONE NUMBER*200# .Note that you will not be able to borrow more that N500 and you do
this only at mid night when recharge card sellers closed. They will give you until one month to pay
back, within this period Whenever you recharge your phone they will collect their money sharp-sharp.
Dial *888*YOUR PHONE NUMBER*200# .Note that you will not be able to borrow more that N500 and you do
this only at mid night when recharge card sellers closed. They will give you until one month to pay
back, within this period Whenever you recharge your phone they will collect their money sharp-sharp.
HOW TO TRANSFER CREDIT FROM ONE
VISAFONE TO ANOTHER
Dial *447*RECIPIENT'S NUMBER*AMOUNT*PIN#SEND
Dial *447*RECIPIENT'S NUMBER*AMOUNT*PIN#SEND
HOW TO GET VISAFONE CALLER TUNE
Text TOP to 777 .Select from the list you will receive.
Text TOP to 777 .Select from the list you will receive.
WATCH CNN NEWS FROM VISAFONE
For news type CNN send to 33800
For comerce type CNN MONEY sent to 33800 .You must have at least N200 on your phone.
For news type CNN send to 33800
For comerce type CNN MONEY sent to 33800 .You must have at least N200 on your phone.
ZAIN
ZAIN FREE NIGHT CALL FROM 12.30
am to 4.30 am
Go to message.Text YES then send to 701. You will be enabled. Remember you must have at least
N100 on your phone before you enjoy this service.
Go to message.Text YES then send to 701. You will be enabled. Remember you must have at least
N100 on your phone before you enjoy this service.
HOW
TO REDUCE CALL COST ON ZAIN
Before you join the ZAIN family and friends to reduce call costs you must be either on ZAIN
Simply special or Smooth.
To migrate to simply special dial *141*701#
To migrate to Smooth dial *141*702#
To migrate to special smart dial *141*703#
Once you are on either of these classes to make call at cheap rate dial *141*2*THE PERSON'S
NUMBER#SEND .You would be connected and from then you pay 10 kobo per second.
To cancel it #141*3*THE PERSON'S NUMBER#SEND
To migrate to ZAIN true talk *141*708#
To migrate to ZAIN true text *141*709#
Before you join the ZAIN family and friends to reduce call costs you must be either on ZAIN
Simply special or Smooth.
To migrate to simply special dial *141*701#
To migrate to Smooth dial *141*702#
To migrate to special smart dial *141*703#
Once you are on either of these classes to make call at cheap rate dial *141*2*THE PERSON'S
NUMBER#SEND .You would be connected and from then you pay 10 kobo per second.
To cancel it #141*3*THE PERSON'S NUMBER#SEND
To migrate to ZAIN true talk *141*708#
To migrate to ZAIN true text *141*709#
HOW TO SHARE CREDIT ON ZAIN.
Go to message. Type me2u space THE RECIPIENTS'S PHONE NUMBER space AMOUNT space 1234 send to 432
Go to message. Type me2u space THE RECIPIENTS'S PHONE NUMBER space AMOUNT space 1234 send to 432
ZAIN
CALL ME BACK CODES. This codes allows you to send free text message ZAIN to
ZAIN whether you have
credit on your phone or not.
For call me back dial *140*THE PERSON'S PHONE NUMBER*SEND
For credit me dial *141*8*THE PERSON'S PHONE NUMBER*SEND
credit on your phone or not.
For call me back dial *140*THE PERSON'S PHONE NUMBER*SEND
For credit me dial *141*8*THE PERSON'S PHONE NUMBER*SEND
GLO
GLO
FREE NIGHT CALL FROM 12.30 am to 4.30 am
Dial 121 then follow the voice prompt .You will be enabled. Remember you must have at least
N100 on your phone before you enjoy this service.
Dial 121 then follow the voice prompt .You will be enabled. Remember you must have at least
N100 on your phone before you enjoy this service.
HOW
TO REDUCE CALL COST ON GLO
Dial 125 ,follow the instructions and you will be connected.
To make video calls on GLO dial 444 with your 3G phone. Your phone and the phone of the person you call
must have video to enable you see who you are calling.
Dial 125 ,follow the instructions and you will be connected.
To make video calls on GLO dial 444 with your 3G phone. Your phone and the phone of the person you call
must have video to enable you see who you are calling.
GLO CALLER TUNE
Send REG to 7728 then you will receive a confirmation to select music code.
Send REG to 7728 then you will receive a confirmation to select music code.
HOW TO SHARE CREDIT ON GLO
Go to message. Text ACT space THE RECIPIENTS NUMBER space AMOUNT space 5555 send to 131.
Go to message. Text ACT space THE RECIPIENTS NUMBER space AMOUNT space 5555 send to 131.
STARCOMMS
HOW
TO TRANSFER CREDIT FROM STARCOMMS TO STARCOMMS
Go to message. Type *678*THE PERSON'S NUMBER*1234#SEND
Starcomms customer care *23 SEND
Customer care 8041234 or 07028000123
Recharge access *333* or *999*
Balance enquiry *225#
How to recharge. Dial *333*PIN NUMBER ON RECHARGE CARD . Then SEND and listen to the voice
prompt, if recharge is successful press 1 to confirm.
Go to message. Type *678*THE PERSON'S NUMBER*1234#SEND
Starcomms customer care *23 SEND
Customer care 8041234 or 07028000123
Recharge access *333* or *999*
Balance enquiry *225#
How to recharge. Dial *333*PIN NUMBER ON RECHARGE CARD . Then SEND and listen to the voice
prompt, if recharge is successful press 1 to confirm.
ETISALAT
ETISALAT customer service dial 200 from etisalat phone
Dial 08090000200 from other phones
How to recharge. Dial *222*RECHARGE PIN NUMBER#SEND
To recharge by voie dial 222 then follow the voice prompt
To check balance dial *232#
To check balance by voice dial 232 then follow the voice prompt
Voice mail dial 252
To know your phone number dial *248#SEND
To transfer credit dial *223*PERSONAL SECURITY CODE*AMOUNT*RECIPIENTS NUMBER#SEND
With Etisalat ring back tune your caller listens to a voice message instead of the regular
Kruuuuuum Kruuuuuum. Dial 251 to get it.
To recharge another person from your phone dial *222*RECHARGE CARD PIN NUMBER*RECIPIENT'S NUMBER#SEND
Etisalat call me back service. This allow you to send message to etisalat subscriber at no cost.
Call me back. Thank you dial *266*THE PERSON'S NUMBER#SEND
Call me back. I love you dial *266*1*THE PERSON'S NUMBER#SEND
Call me back. I landed safely dial *266*2*THE PERSON'S NUMBER#SEND
Call me back. I'am now available dial *266*3*THE PERSON'S NUMBER#SEND
Call me back. It' an emergency *266*4*THE PERSON'S NUMBER#SEND
ETISALAT customer service dial 200 from etisalat phone
Dial 08090000200 from other phones
How to recharge. Dial *222*RECHARGE PIN NUMBER#SEND
To recharge by voie dial 222 then follow the voice prompt
To check balance dial *232#
To check balance by voice dial 232 then follow the voice prompt
Voice mail dial 252
To know your phone number dial *248#SEND
To transfer credit dial *223*PERSONAL SECURITY CODE*AMOUNT*RECIPIENTS NUMBER#SEND
With Etisalat ring back tune your caller listens to a voice message instead of the regular
Kruuuuuum Kruuuuuum. Dial 251 to get it.
To recharge another person from your phone dial *222*RECHARGE CARD PIN NUMBER*RECIPIENT'S NUMBER#SEND
Etisalat call me back service. This allow you to send message to etisalat subscriber at no cost.
Call me back. Thank you dial *266*THE PERSON'S NUMBER#SEND
Call me back. I love you dial *266*1*THE PERSON'S NUMBER#SEND
Call me back. I landed safely dial *266*2*THE PERSON'S NUMBER#SEND
Call me back. I'am now available dial *266*3*THE PERSON'S NUMBER#SEND
Call me back. It' an emergency *266*4*THE PERSON'S NUMBER#SEND
IMPORTANT TELECOMMUNICATIONS
ABBREVIATIONS YOU SHOULD KNOW.
GSM:
Global system for mobile communications
PMB: Per munite billing
SIM: Subscribers identification module
DC: Direct current
BAIC: Barring of all incoiming calls
IDD: International direct dialling
PIN: Personal identification number
BI: Basic information
OSS: Operation and support sub-system
HLR: Home location register
SMS: Short message service
ISDN: Integrated service digital network
PC: Personal computer
PUK: PIN unblocking keys
PTC: Private telecommunications center
MRF: Mobile radio frequency
IMEI: International mobile equipment identity
CUG: Close users group
MCC: Mobile country code
CW: Call waiting
PSB: Per seconds billing
MMS: Multimedia message service
WAP: Wireless application protocol
PMB: Per munite billing
SIM: Subscribers identification module
DC: Direct current
BAIC: Barring of all incoiming calls
IDD: International direct dialling
PIN: Personal identification number
BI: Basic information
OSS: Operation and support sub-system
HLR: Home location register
SMS: Short message service
ISDN: Integrated service digital network
PC: Personal computer
PUK: PIN unblocking keys
PTC: Private telecommunications center
MRF: Mobile radio frequency
IMEI: International mobile equipment identity
CUG: Close users group
MCC: Mobile country code
CW: Call waiting
PSB: Per seconds billing
MMS: Multimedia message service
WAP: Wireless application protocol
not tired of code then continue here
Samsung Secret Codes
Software version: *#9999#
IMEI number: *#06#
Serial number: *#0001#
Battery status- Memory capacity : *#9998*246#
Debug screen: *#9998*324# - *#8999*324#
LCD kontrast: *#9998*523#
Vibration test: *#9998*842# - *#8999*842#
Alarm beeper - Ringtone test : *#9998*289# - *#8999*289#
Smiley: *#9125#
Software version: *#0837#
Display contrast: *#0523# - *#8999*523#
Battery info: *#0228# or *#8999*228#
Display storage capacity: *#8999*636#
Display SIM card information: *#8999*778#
Show date and alarm clock: *#8999*782#
The display during warning: *#8999*786#
Samsung hardware version: *#8999*837#
Show network information: *#8999*638#
Display received channel number and received intensity: *#8999*9266#
UNIVERSAL GSM CODE
Cancel
all redirections: ##002#
*43#
to activate call waiting, to deactivate #43#.
If
your phone doesn't have incoming call barring and outgoing call barring, you
can try this.
For
outgoing call barring dial *33*barcode*# and pres OK. To deactivate it dial
#33#barcode*#.
On
any phone on any network type in **43# to enable conference calls. You can make
up to 7 calls at once
If
you need to block SMS reception (if you are spammed by someone) just press this
code:
Nokia Secret Codes
Nokia Secret Codes
On the main screen type in:
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \
*#7328748263373738# resets security code.
Default security code is 12345
Change closed caller group (settings >security settings>user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold "0" on the main screen to open wap browser.
ONLY THE WISE UNDERSTAND
I switched between these IPson Proxo
194.83.240.11:8080
177.234.0.174 3130
72.159.148.20:10000
103.10.22.242:3128
I hardly stream mostly browsing, but trying it
now with Youtube is working well.
194.83.240.11:8080
177.234.0.174 3130
72.159.148.20:10000
103.10.22.242:3128
I hardly stream mostly browsing, but trying it
now with Youtube is working well.
Wednesday 16 September 2015
hauwei
hi friends,
As you know we are continuously providing unlocking tutorial for all data card and trying to cover unlocking method for all modem if your modem is not cover please notify us by comments we will try to post it soon.
as you know we have to enter unlock code after unlocking the huawei
data cards and by default it provides 10 attempt to enter unlock coded
after publishing many unlocking tutorial for Huawei Data card i got many
comments that many users have entered wrong unlock code 10 times and it
says your modem is locked forever so users
are confused what to do ?? is you are facing this problem ?? then you are at right place yes,you can solve this problem too by just resetting unlock code counter by just following simple steps listed in tutorial with screen shots.so i am not taking much time and coming to the tutorial just go ahead and read the tutorial with screen shots
As you know we are continuously providing unlocking tutorial for all data card and trying to cover unlocking method for all modem if your modem is not cover please notify us by comments we will try to post it soon.
are confused what to do ?? is you are facing this problem ?? then you are at right place yes,you can solve this problem too by just resetting unlock code counter by just following simple steps listed in tutorial with screen shots.so i am not taking much time and coming to the tutorial just go ahead and read the tutorial with screen shots
Requirements
Huwaei Modem Unlocker
Get It From Here
Steps You Have To Follow
- First of all collect all requirements given below. Then Open Huawei
Modem Unlocker From The Zip File You can See Following Window Then Click
On REFRESH
- Now Just See Following Screen Shot As Given In Screen Shot Just Select your modems COM PORT
- Now After Selecting COM PORT Click on READ MDM DATA And Your modem details will be read and after it you can see following window showing modem details
- Now Select RESET COUNTER From huawei Modem Unlocker And Click on SERVICE
- You Are Done Your Modem Unlock Code Counter Is Now Resetd Have a look on following Screen
- You Are Done Your Modem Unlock Code Counter Is Now Resetd Have a look on following Screen
Hope you have rested your unlock code counter so please do share this article to your friend and give us support by commenting
Sunday 13 September 2015
How To Run Java Games and Applications on Your New Android Phone
This is a tutorial on how to run java games and applications on your new Android Phone or run any Java/J2ME/MIDP games or applications natively using JBed Android Java Emulator.
Installation steps:
1. Install jbed 1.20 Android
2. Click "SD card" on menu
3. Choose your JAR file
4. Install
5. Click on your installed java apps and run
DOWNLOAD
Jbed For Android 2.2 (.apk)
Jbed For Android 2.1 (.apk)
Jbed For Android 1.6 (.apk)
Jbed For Android 1.5 (.apk)
EASY STEPS TO ROOT LATEST TECNO L3 TO ENJOY YOUR DEVICE MORE.
ROOT TECNO L3
This guide may help to root your tecno l3.Before rooting your Tecno L3
Step 1: Your Tecno L3 should be fully charged.
Step 2: Disable Security programs like Antivirus and Firewall from your PC and uninstall it from your Tecno L3, as they MAY interfere.
Step 3: Allow USB Debugging on your device from the path “Settings &; Applications >Development > USB
debugging”.
Download Bin4ary Root Tool from here to your computer. Extract the download into a folder on your PC.
How To Root Tecno L3 Using OneClick Root Script:
Step 1: Connect phone to the PCusing USB cable.
Step 2: From the folder double-click on “RunMe.bat” to run.
Step 3: Follow the instructions in the application.
Hope it works for you share your experience in the comments box.
How To Unlock All Huawei Modems e.g E303 etc for FREE
I’ve previously written a post on how to unlock huawei modems,
but we are meant to understand that the process does not work for the
recent Huawei modems the Network service providers make available for
sales.
Although there are ways to unlock the stubborn Huawei modems such
as the E303 series, but it usually requires using the services of
unlock softwares such as DC unlocker which of course is not a free
option.
In this guide, I’ll teach you how you can unlock any huawei modem without paying a dime such as the DC unlocker option for unlock credits. Follow the steps carefully to successfully unlock your Huawei modem as this has been working for me.
Steps To Unlocking All Stubborn Huawei Modems Without Paying For Unlock Credits
1. Click Here to visit the website where you would generate the unlock code.
2. When the page loads, click on the Google plus icon to log in with
your Google plus account (You must have a functional G+ account to use
this service). If you are using the calculator First time it will ask
you to Accept Terms and Condition click on “I Accept” and proceed.
3. Once you log in, type in your Modem’s IMEI number and Model series in the appropriate form boxes provided and click on “Calculate“.
4. The Unlock code would be generate but won’t be visible till you click
on the +1 button to share the page. Sharing the page on G+ using the
button reveals the Unlock code to unlock your huawei modem.
5. The code generate would look like this
Model No. : E303s-1
IMEI : 834548010418202
NEW ALGO CODE : 88028383
OLD ALGO CODE : 35410271
FLASH CODE : 94602058
IMEI : 834548010418202
NEW ALGO CODE : 88028383
OLD ALGO CODE : 35410271
FLASH CODE : 94602058
Copy the codes generated to notepad. The problem you face is knowing the
particular code you are to unlock the modem with. But don’t worry, Click Here and insert your modem’s IMEI number then click on “Submit IMEI“.
This would help you determine which of the codes would unlock your modem.
If it loads a result as “Please Proceed To Huawei New Algorithm!” then the NEW ALGO CODE generated by the unlocker is your modem’s unlock code, else if you get “Please Proceed To Huawei Old Algorithm!“, then the OLD ALGO CODE generated is what you need to unlock your Huawei modem.
6. Now insert an alien sim (SIM not supported on your huawei modem) into
the modem and plug to your computer, you will receive a dialogue box
pop up asking for your modem’s unlock PIN, input the NEW or OLD ALGO
CODE generate as your case may be and click on the UNLOCK button
provided.
You just unlocked your Huawei modem without paying a dime.
Note: This Huawei Modem Unlocking Procedures works for the following Huawei Modem Models below
- Huawei E171
- Huawei E172
- Huawei E173
- Huawei E176
- Huawei E177
- Huawei E180
- Huawei E181
- Huawei E182
- Huawei E166
- Huawei E155
- Huawei E156
- Huawei E158
- Huawei E160
- Huawei E170
- Huawei E161
- Huawei E169
- Huawei E188
- Huawei E196
- Huawei E216
- Huawei E219
- Huawei E220
- Huawei E226
- Huawei E22X
- Huawei E230
- Huawei E270
- Huawei E271
- Huawei E272
- Huawei E303
- Huawei E352
- Huawei E353
- Huawei E355
- Huawei E357
- Huawei E367
- Huawei E368
- Huawei E369
- Huawei E372
- Huawei E392
- Huawei E397
- Huawei E398
- Huawei E612
- Huawei E618
- Huawei E620
- Huawei E630
- Huawei E660
- Huawei E800
- Huawei E870
- Huawei E880
- Huawei E968
- Huawei E1550
- Huawei E1551
- Huawei E1552
- Huawei E1553
- Huawei E155X
- Huawei E156C
- Huawei E156G
- Huawei E156X
- Huawei E1609
- Huawei E160E
- Huawei E160G
- Huawei E1612
- Huawei E1615
- Huawei E1616
- Huawei E1630
- Huawei E1632
- Huawei E166G
- Huawei E1690
- Huawei E1692
- Huawei E1820
- Huawei E1823
- Huawei E182E
- Huawei E1831
- Huawei E1800
- Huawei E1803
- Huawei E180G
- Huawei E180S
- Huawei E169G
- Huawei E170G
- Huawei E1780
- Huawei E172G
- Huawei E1762
- Huawei E2010
- Huawei S4011
- Huawei E1731
- Huawei E3131
- Huawei E630+
- Huawei E660A
- Huawei K3517
- Huawei K3520
- Huawei K3710
- Huawei EG162
- Huawei EG602
- Huawei EM770
- Huawei EG602G
- Huawei EG162G
- Huawei UMG181
- Huawei HiLink
BLOG PASS BLOG: CLICK HERE TO MEET THE BIGGIES BLOGGERS
Dc Unlocker Cracked Version+Unlimited Credit Unlimited Credit
Dc Unlocker Cracked Version+Unlimited Credit
Unlimited Credit
DC-unlocker 2013 client software V1.00.1005+Crack,Full version,Cracked,Unlimited Credit,Unlimited User Name,Password
DC-unlocker client software V1.00.1005+Crack,Full version,Cracked,Unlimited Credit,Unlimited User Name,Password
DC unlocker v1.00.1005 is a program specialized for data card and modem unlocking.
First universal free data card unlocking software worldwide.
Easy to use and full functional program with clear interface.
DC-unlocker client software V1.00.1005+Crack,Full version,Cracked,Unlimited Credit,Unlimited User Name,Password
DC unlocker v1.00.1005 is a program specialized for data card and modem unlocking.
First universal free data card unlocking software worldwide.
Easy to use and full functional program with clear interface.
Dc Unlocker
Cracked Version Unlimited Free Credit Unlock All USB Modem, DATA Card
Free. Free Download Dc Unlocker, Dc Crap, Cracked Version with
Unlimited Free Credit. By Using Dc Unlocker Crack Version You Can Unlock
Most of Data Card or USB Modem. If You Want To Free Unlock Your Modem
Then You Can Use Dc Unlocker Cracked Version. This is the Cracked
Version of DC Unlocker. So You Do not Need Any Credit.
Instraction To
Unlock Your Modem: Extract the content of the .zip file Once you
extracted all the required files, run "dccrap.exe" Disconnect to the
internet and plug your USB Modem with a different provider SIM. (for
Huawei users, you dont need to swap any SIM). And insert your modem to
the USB port. Choose what "manufacturer" that your modem is. (Huawei
Datacards or ZTE Datacards... choose that matches on your Modem.) Click
the magnifying glass, and it will search for plugged USB modems. Once
the modem is detected, go to login page, type whatever you want. It's
just a lame login system. Click Unlocking menu, then choose "unlock".
Wait till the unlocker program says that, unlock is successfully done.
Enjoy your unlocked Modem.
- -Extract the content of the zip file to a zip folder
- -Locate dccrap.exe and run.
- -Disconnect your internet connection and plug your ZTE or Huawei USB modem with an alien SIM card (an unsupported SIM card from a different network operator) inserted.
- -If you’re to unlocking a Huawei modem, there’s no need to change your SIM. simply plug your modem into your computer’s USB port.
- -If the connection manager pops up, close the window.
- -Depending on your type of data card, select either ZTE or Huawei from DC – UNLOCKER 2 CLIENT user interface.
- -Click on the magnifying glass to automatically search for the modem
8. -Once the modem is detected, click on Server and type “crackmega” in the username field and without quote “crackmega.com” for password.
9. -Click Unlocking menu, then select unlock.
10. -Wait for a moment till the programs displays this message: unlock is successfully done
11. -Now you can use any SIM card on your unlocked USB modem
{{DOWNLOAD}}
Version: Size: 2.5 MB
IF YOU FIND IT DIFFICUIT THEN ENTER THIS SITE AND PUT ON YOUR IMEI NUMBER AND IT WILL GIVE YOU THE UNLOCK CODE
THANKS
Dc Unlocker Cracked Version+Unlimited Credit
Dc Unlocker Cracked Version+Unlimited Credit
Unlimited Credit
DC-unlocker 2013 client software V1.00.1005+Crack,Full version,Cracked,Unlimited Credit,Unlimited User Name,Password
DC-unlocker client software V1.00.1005+Crack,Full version,Cracked,Unlimited Credit,Unlimited User Name,Password
DC unlocker v1.00.1005 is a program specialized for data card and modem unlocking.
First universal free data card unlocking software worldwide.
Easy to use and full functional program with clear interface.
DC-unlocker client software V1.00.1005+Crack,Full version,Cracked,Unlimited Credit,Unlimited User Name,Password
DC unlocker v1.00.1005 is a program specialized for data card and modem unlocking.
First universal free data card unlocking software worldwide.
Easy to use and full functional program with clear interface.
Dc Unlocker
Cracked Version Unlimited Free Credit Unlock All USB Modem, DATA Card
Free. Free Download Dc Unlocker, Dc Crap, Cracked Version with
Unlimited Free Credit. By Using Dc Unlocker Crack Version You Can Unlock
Most of Data Card or USB Modem. If You Want To Free Unlock Your Modem
Then You Can Use Dc Unlocker Cracked Version. This is the Cracked
Version of DC Unlocker. So You Do not Need Any Credit.
Instraction To
Unlock Your Modem: Extract the content of the .zip file Once you
extracted all the required files, run "dccrap.exe" Disconnect to the
internet and plug your USB Modem with a different provider SIM. (for
Huawei users, you dont need to swap any SIM). And insert your modem to
the USB port. Choose what "manufacturer" that your modem is. (Huawei
Datacards or ZTE Datacards... choose that matches on your Modem.) Click
the magnifying glass, and it will search for plugged USB modems. Once
the modem is detected, go to login page, type whatever you want. It's
just a lame login system. Click Unlocking menu, then choose "unlock".
Wait till the unlocker program says that, unlock is successfully done.
Enjoy your unlocked Modem.
- -Extract the content of the zip file to a zip folder
- -Locate dccrap.exe and run.
- -Disconnect your internet connection and plug your ZTE or Huawei USB modem with an alien SIM card (an unsupported SIM card from a different network operator) inserted.
- -If you’re to unlocking a Huawei modem, there’s no need to change your SIM. simply plug your modem into your computer’s USB port.
- -If the connection manager pops up, close the window.
- -Depending on your type of data card, select either ZTE or Huawei from DC – UNLOCKER 2 CLIENT user interface.
- -Click on the magnifying glass to automatically search for the modem
8. -Once the modem is detected, click on Server and type “crackmega” in the username field and without quote “crackmega.com” for password.
9. -Click Unlocking menu, then select unlock.
10. -Wait for a moment till the programs displays this message: unlock is successfully done
11. -Now you can use any SIM card on your unlocked USB modem
{{DOWNLOAD}}
Version: Size: 2.5 MB
Subscribe to:
Posts (Atom)